In regard to the guidelines of the Ministry of Health concerning the advertising of medical devices, in vitro medical devices and medical-surgical devices, we inform that the information contained on this website is intended exclusively for professional operators.
Mild alkaline liquid cleaner for mechanical reprocessing of medical devices. Residue-free, thorough cleaning with very good material compatibility. Low foam development and highest cleaning performance against typical soiling.
Mild alkaline liquid cleaner for mechanical reprocessing.
|Our performance||Your advantage|
|Specially developed formulation with high material protection||Very good material compatibility even against sensitive materials*|
|Powerful formulation components||Low foam development and highest cleaning performance against typical soiling from the medical area Economical due to low dosing.|
|Addition of corrosion inhibitors||Broad use spectrum over almost all materials used in the medical area|
|pH > 10 in the application solution at process temperature||Secure reprocessing of medical instruments|
In cleaning and disinfection devices in the medical area, depending on the water quality, can be used with 3-6ml/l preferably with DI water.
For surgical instruments and other medical instruments and accessories that can be thermally disinfected at 93 °C.
For reprocessing OP shoes and thermolabile medical materials at 45 to 60 °C.
Chemical thermal disinfection; with Sekumatic™ FD or Sekumatic™ FDR at 60 °C for 5-10 minutes.
When neutralization is needed (bad water quality) Sekumatic™ FNZ or Sekumatic™ FNP can be used.
Also suitable for reprocessing lab glass and baby bottles.
Neutralization may be done with Sekumatic™ FNZ or Sekumatic™ FNP. Thermal disinfection: For final rinsing, preferably use fully demineralized water (DI).
Sekumatic™ ProClean is based on sodium hydroxide, sequestrates, corrosion inhibitors, additives.
Sekumatic ProClean is based on sodium hydroxide, sequestrates, corrosion inhibitors, additives.
|Use (after commencement)||Shelf life|
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness. The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.
Disinfectant for medical devices